ijaers social
facebook
twitter
Blogger
google plus

International Journal of Civil, Mechanical and Energy Science

ijcmes google ijcmes academia ijcmes rootindexing ijcmes reddit ijcmes IIFS ijcmes research bib ijaers digg ijcmes tumblr ijcmes plurk ijcmes I2OR ijcmes ASI ijcmes slideshare ijcmes open jgate ijcmes exactseek ijcmes Scrub the web ijcmes entireweb ijcmes speech counts ijcmes bibsonomy

Experimental Investigation of Buckling Strength Comparison between Metallic and CFRP Sandwiched Composite Panel( Vol-2,Issue-2,March 2016 )

Author(s):

G.Purushotham

Keywords:

CFRP composite, Buckling strength,Aluminum alloy, Universal testing machine.

Abstract:

In the current investigation, a comparison will be made between the Aluminum and Aluminum-Carbon Fiber Reinforced Polymer (CFRP) sandwiched composite panels for buckling load carrying capability. The panels with maximum compression load will be identified as critical panels for buckling analysis. Classical approach will be followed to calculate the critical buckling load on each panel. Testing of both panel will be carried out using Universal Testing Machine (UTM). Axial compression load will be applied on the panel. Dial gauges will be placed either side of the panel to capture the displacement about the center of the panel for response of the structure under uni-axial compression loading. Interpolation of the test results will be carried out for comparison of the buckling strength between two panels

Cite This Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)
Paper Statistics:
  • Total View : 812
  • Downloads : 23
  • Page No: 021-026
Share:
References:

[1] R. Thamarai Kannan, Shibu.S, “Fabrication and Buckling analysis of Glass Fiber Reinforcement Polymer cylinder and Aluminium cylinder”. - JCHPS Special Issue 9: April 2015.
[2] Deepak G, G. Tejani, “Experimental test on sandwich panel composite material”, -IJIRSET, Vol 2, Issue 7, July 2013.
[3] Shivraj, Ranganatha, K.E.Girish “Plasticity Correction Factors for Buckling of Flat Rectangular Glare plates loaded in Compression or Shear”. - ICAS 2002 CONGRESS.
[4] Haim Abramovich, Tanchum weller, “Buckling and postbuckling behavior of laminated composite stringer stiffened curved panels under axial compression: experiments and design guidelines”. - Journal of mechanics of materials and structures Vol 4, No.7-8, 2009.
[5] Joseph Clint, Santosh kumar, “Buckling and linear analysis of fuselage structure subjected to air load distribution”. - IJARSE, Vol. No.3, Issue No.9, September 2014.
[6] Nazumuddin Sheik, “An Experiment investigating into the buckling of GFRP stiffened shells under axial loading”. Scientific Research and essay Vol.4(9), pp.914-920, September 2009
[7] V.S. Ramamurthy, G. Vamja,“Buckling Analysis on Aircraft Fuselage Structure Skin”. - 2014 IJEDR, Volume 2, Issue 4.