ijaers social
facebook
twitter
Blogger
google plus

International Journal of
Civil,Mechanical and Energy Science

ijcmes google ijcmes academia ijcmes rootindexing ijcmes reddit ijcmes IIFS ijcmes research bib ijaers digg ijcmes tumblr ijcmes plurk ijcmes I2OR ijcmes ASI ijcmes slideshare ijcmes open jgate ijcmes exactseek ijcmes Scrub the web ijcmes entireweb ijcmes speech counts ijcmes bibsonomy

Effect of Deformation on the properties of Al-4Cu-0.5Mg-2SiC Powder Metallurgy Composite( Vol-3,Issue-6,November 2017 )

Author(s):

B. Chaitanya, C.Venkatesh, G.Suresh, K S M Yadav

Keywords:

Deformation, Workpiece, Sintering, Powder metallurgy.

Abstract:

The increasing demand for efficient materials in the automotive industry gave a great scope for development of metal matrix composites. In the present study, Al-4Cu-0.5Mg-2SiC composite is prepared through powder metallurgy route. The powder mixture is compacted and pressure less sintered at 550oC for 1 hour in control atmosphere (Argon gas). The relative density of the sintered preforms is found to be 90% approximately. Sintered preforms are used as workpiece materials for deformation study at different temperatures in order to find the effect of temperature on the densification behavior. The stress strain curve is obtained during the deformation process. The effect of deformation on the hardness of the composite is studied.

Cite This Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)
Paper Statistics:
  • Total View : 18
  • Downloads : 10
  • Page No: 218-221
Share:
References:

[1] A. Riaz Ahamed , P. Asokan and S. Aravindan, EDM of hybrid Al–SiCp–B4Cp and Al–SiCp–Glassp MMCs, Journal Advance Manufacturing Technol (2009) 44;520–528.
[2] M. Ramulu, G. Paul and J. Patel, EDM surface effects on the fatigue strength of a 15vol% SiCP/Al metal matrix composite material, Composite structures 54 (2001); 79-86.
[3] Sai Mahesh Yadav Kaku, Asit Kumar Khanra and M J Davidson, Effect of Deformation on Densification and Corrosion behavior of Al-ZrB2 Composite. Metallurgical & Materials Engineering, Volume 23, Number 1, 2017, pp. 47-63(17)
[4] R. Chandramouli , T.K. Kandavel, D. Shanmugasundaram, T. Ashok Kumar, Deformation, densification, and corrosion studies of sintered powder metallurgy plain carbon steel preforms. Materials and Design 28 (2007); 2260–2264.
[5] K. S. Pandey, Salient characteristics of high temperature forging of ferrous preforms. Key engineering materials, vols. 29–31. Switzerland: Trans Tech Publications; 1989. P; 465–86.
[6] Olle Grinder, Cao Young Jia, Ylva Nisson, Hot upsetting and hot repressing of sintered steel preforms. In: Aqua N, Charles L, editors. Modern developments in powder metallurgy, vol. 15. p; 611–37.
[7] Harsh Saini, Irfan Khan, Sushil Kumar, Sahil Kumar(2017).Optimization of Material Removal Rate of WEDM Process on Mild Steel Using Molybdenum Wire. International Journal of Advanced Engineering, Management and Science (ISSN: 2454-1311), 3(10), 1001-1005. http://dx.doi.org/10.24001/ijaems.3.10.5
[8] Antes HW, Cold and hot forging of P/M preforms. In: S.M.E. international meeting, Philadelphia, Special Report, 71–01, April 1971. p; 1–22.